Skip to main content

J-Head based Experimental Hot End MK I



Here is one of the hotends for my reprap I'm working on.. PEEK is definitely a better choice than PTFE. It fits perfectly Greg's Wade reloaded extruder
Pic 1.  cold end without hex lock screw as you can  see ;)
Pic 2. hot side, with 6R8 3watt ceramic resistor
Pic 3. Total length of PEEK part is 40mm 

 And here is a small part printed with MK I ,nozzle used 0.3mm 3mm filament


Comments

  1. Anonymous5 March 2022 at 09:05

    Sugarboo Extra Long Digital Titanium Styler - Titanium
    TITNIA STRAWLER, HONOVIE, MA. 4.6. 2021. 1,538. 3,099. 3,099. 3,099. 3,099. 3,099. 3,099. 3,099. 3,099. 3,099. 3,099. 3,099. snow peak titanium spork 3,099. columbia titanium pants 3,099. 3,099. men\'s titanium wedding bands 3,099. 3,099. 3,099. 3,099. 3,099. 3,099. 3,099. titanium or ceramic flat iron 3,099. 3,099. how strong is titanium 3,099. 3,099. 3,099. 3,099. 3,

    ReplyDelete
  2. shuthe16 September 2022 at 12:42

    ow230 jordan 1 off white,jordan 12,jordan 11 low,jordan 4 retro,jordan 1,jordan 4 bred,jordan 11 cool grey,yeezy 350 static,jordan 4 unc

    ReplyDelete

Post a Comment